During the cutting process, if the actual cutting speed is much smaller than the set working speed, the cutting jerk parameter setting is too small, so that the laser head cannot quickly reach the set working speed. If the actual cutting speed is faster, the cutting line appears to be dithered, indicating that the cutting jerk setting is too large, and the parameter value needs to be reduced.
The idle jerk parameter setting is the same. If the idle jerk parameter setting is too small, the laser head takes a long time to reach the set idle speed. If the parameter is set too large, the cutting start position after the laser head is idling will be shaken. The take-off speed is the jump speed of the laser head from rest to start. If the cut line at the cutting start position is too thick, the parameter value is set too small; if the line at the start of the cut is jittery, the parameter value is set too large.
The speed coefficient controls the speed when cutting and turning. If the cutting line is too thick when turning, the parameter setting is too small. If the cutting line is too thin when turning, it cannot be completely disconnected, indicating that the parameter value is set too large. The rate of change in speed during engraving is the acceleration of the engraving. This parameter is only valid when engraving. During the engraving process, if the laser head is too large, it means that the parameter setting is too small, and should be adjusted appropriately; if the laser head is too small, the edge of the graphic is incompletely engraved, indicating that the parameter setting is too large and should be appropriately reduced. small.
Of course, the above motion parameter settings are more suitable for the Trocen laser controller system. If you have any questions, you can contact us!
We specialize in providing you with high-quality CNC controller (visual cutting control system) and related accessories for cutting, milling, engraving, etc. We support a global fast delivery service for your order. And you could also visit our store in the Aliexpress.com NewCarve store.
If you have any questions, please feel free to contact us:
Email: icnccontroller@gmail.com
Messenger: +8618820192009
WhatsApp : +8618820192009