CNC Mach3 motion control card-MKX-V
Model Number: MKX-V Size：184*127*30mm
1. Applications of MKX-V USB Motion Control Card
MKX-V has 3 series：Works with Mach3 CNC system under all windows platform
MK3-V：3 axis motion card.
MK4-V：4 axis motion card.
MK6-V：6 axis motion card.
2. Application overview of MKX-V USB Motion Control Card
3. Product overview of MKX-V USB Motion Control Card
4. Signal connection of MKX-V USB Motion Control Card
5. The key feature of MKX-V USB Motion Control Card
1.Standard USB device and work at all windows with USB hotplug.
2. The card state is monitored.
3.Support 6 axis to motion at the same time.
4.Step Pulse frequency Up to 2000khz，support servo and step motor driver.
5.The USB state indication with led
6. All io is isolated,anti-noise and stable performance
7.Spindle control with PWM and step/pulse
8. Aluminum shell, shield the interference.
9.speed index function.
10.power off and continue function
6. General Characteristics of MKX-V USB Motion Control Card
| Parameter | Description | |
| Axis drive control |
Isolated oc output | Voltage:5V,maximum load :20A |
| Type | STEP/DIR | |
| Maximum Step frequency |
2000KHZ | |
| Number of support axis |
MK3-V：3 axis
MK4-V：4 axis MK6-V：6 axis |
|
| Spindle control | Analog output voltage | 0-10V |
| Digital PWM output | 5V,1KHZ,fill factor:%1-100% |
|
| STEP/DIR | Min frequncy：15Hz Max frequncy：4KHz |
|
| 8 digital output | Maxmimum load of output line |
50mA |
| Maxmimum voltage on out line |
25V | |
| 16 digital input | Maxmimum load of input line |
5mA |
| Maximum voltage on input line |
25V | |
| PC connection | Standard USB2.0 |
7. Attachments of MKX-V USB Motion Control Card
| MKX-V motion card | 1 piece |
| Use wire | 1 piece |
| Driver disk | 1 disk |
| MACH3-USB troubleshooting | 1 book |
| MACH3 config and driver installation | 1 book |
| MKX –V user Manual | 1 book |
| Package box size | 275*144*42mm |
| Weight | 0.7KG |
