CNC Mach3 motion control card-MKX-ET
Model Number: MKX-ET Size：184*127*30mm
1、Applications of MKX-ET Ethernet Motion Control Card
MKX-ET has 3 series：Works with Mach3 CNC system under all windows platform
MK3-ET：3 axis motion card.
MK4-ET：4 axis motion card.
MK6-ET：6 axis motion card.
2、Application overview of MKX-ET Ethernet Motion Control Card
3、Product overview of MKX-ET Ethernet Motion Control Card
4、Signal connection of MKX-ET Ethernet Motion Control Card
5、Key feature of MKX-ET Ethernet Motion Control Card
1. Support all versions of Mach3, only suitable for Windows operating system, only supports Ethernet interface, the need for IP communication address settings.
2. Support the spindle speed feedback function.
3. Support the power-off resume function.
4. Support up to 10 meters Ethernet cable, no need to install the driver, plug and play;
5. Support up to 6-axis linkage, including jogging 6-axis linkage. (Depending on the model, the number of axes is different)
6. Has a 2000KHz pulse output, support differential signal output, support servo/stepper motor.
7. Has a status indicator, you can prompt the connection status, Mach3 connection status, operation, various status at a glance.
8. Has 16 input ports, 8 output ports, support the expansion of input and output all IO port isolation, strong anti-interference, stable performance.
9. Supports spindle PWM speed output; Supports spindle pulse and direction output;
10. Support spindle 0 to 10V analog voltage output.
11. 184x127x30 mm, aluminum housing, shielding interference, stable and reliable.
6、General Characteristics of MKX-ET Ethernet Motion Control Card
| Parameter | Description | |
| Axis drive control |
Isolated oc output | Voltage:5V,maximum load :20A |
| Type | STEP/DIR | |
| Maximum Step frequency |
2000KHZ | |
| Number of support axis |
MK3-ET：3 axis
MK4-ET：4 axis MK6-ET：6 axis |
|
| Spindle control | Analog output voltage | 0-10V |
| Digital PWM output | 5V,1KHZ,fill factor:%1-100% |
|
| STEP/DIR | Min frequncy：15Hz Max frequncy：4KHz |
|
| 8 digital output | Maximum a load of the output line |
50mA |
| Maximum the voltage on outline |
25V | |
| 16 digital input | Maximum load of input line |
5mA |
| Maximum voltage on input line |
25V | |
| communication method | Ethernet interface |
7、Attachments of MKX-ET Ethernet Motion Control Card
| MKX-ET motion card | 1 piece |
| Ethernet cable | 1 piece |
| Driver disk | 1 disk |
| MACH3 troubleshooting | 1 book |
| MACH3 config and driver installation | 1 book |
| MKX –ET user Manual | 1 book |
| Package box size | 275*144*42mm |
| Weight | 0.7KG |
