CNC Controller

CNC controller

What should we pay attention to when setting the laser controller motion parameters? | CNC-Controller.com

Of course, the above motion parameter settings are more suitable for the Trocen laser controller system. If you have any questions, you can contact us!

Chris
2019-05-15

CNC controller

How does the RDC6442 controller connect to a stepper motor driver? | CNC-Controller.com

Each motor driver interface of the RDC644XG series motherboard provides a direction signal, a pulse signal, and a 5V signal for common male connection. The pulse signal and direction signal are both OC outputs.

Chris
2019-05-13

CNC controller

After the WEIHONG controller is started, the machine cannot return to the origin? | CNC-Controller.com

When using the WEIHONG NK260/280 controller, the machine cannot return to the origin. In this case, you can refer to the following troubleshooting methods:

Chris
2019-05-10

CNC controller

Be careful to use the WEIHONG NK260/280 controller!! | CNC-Controller.com

When using the WEIHONG NK260/280 controller, you need to be aware of the following:

Chris
2019-05-09

CNC controller

How to wire the WEIHONG NK260/280 controller? | CNC-Controller.com

When wiring the WEIHONG NK260/280 controller, you need to pay attention to the following:

Chris
2019-05-08

CNC controller

The WEIHONG NK260/280 controller should be installed like this! | CNC-Controller.com

What should we pay attention to installing the WEIHONG NK260/280 controller?

Chris
2019-05-07

CNC controller

How to install Nc Studio control system? | CNC-Controller.com

If you already have an older version of NcStudio on the computer, please remove it before installing the new version.

Chris
2019-05-06

CNC controller

What is the function of the handle controller of the engraving machine? | CNC-Controller.com

The engraving machine has two control modes: one for WEIHONG card control and the other for handle control. Also, the handle controller is a common control method used by woodworking machines and stone engraving machines.

Chris
2019-05-05

CNC controller

How does Ethernet motion control compare to PCI/Fieldbus? | CNC-Controller.com

Ethernet motion control speed Although the PCI data transfer rate may be significantly faster than Ethernet, the important issue is how to take advantage of throughput. Motion control applications are less likely to take up the entire bandwidth of the…

Chris
2019-05-03

CNC controller

Why is Ethernet motion control popular? | CNC-Controller.com

Three reasons why Ethernet motion control can and will be accepted more and more in the next few years of competition.

Chris
2019-04-30