Package Include

The post CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3 first appeared on CNC Controller.

1.Voltage 5V 100PPR.General model, adapt to 98% of the market’s 5V handwheel power supply system
2.Voltage 12V 25PPR.Suitable for Mitsubishi
3.Voltage 24V 100PPR.Suitable for PLC with 24V supply voltage

Pendant Handwheel Features :

1. Cable: (easy to open about 3 meters): imported materials, moderate hardness, can withstand more
than 300,000 times of stretching
2.Housing: New ABS material Corrosion resistant Not easy to break
3.Band switch: FD switch from Taiwan Fuhua Company

Pendant Handwheel Specification :

Unconnected wires must be cut to bare copper，then one after another parcel, Do not touch anything else lines,
components, and housing to avoid causing a short circuit.
1. Please read the manual carefully before wiring, so as not to affect the handwheel operation.
2. The encoder is unable to reverse, the voltage is too high to be burned, usually 5V, such as the new generation
of  Siemens, but Mitsubishi connect 12V, PLC connect 24V.
3. The COM point is the handwheel switch public point, must be connected, otherwise, the switch will not
work properly.
4. The handwheel is light to handle, the collision is easy to be damaged, the rotating code disk and the switch
cannot be too hard, so as not to affect the service life
5. If you don’t have A -, B – signal, you don’t have to connect
6. If Mitsubishi does not have A -, B – signal, PLC does not have A -, B – signal, these signals are not connected.

The post 4 6 Axis MPG Universal Pendant Handwheel Manual Pulse Generator 5V 12V 24V With Emergency Stop For CNC Router Machine NEWCARVE first appeared on CNC Controller.

Mounting Dimension OF WEIHONG Nc Studio CONTROL SYSTEM

Host computer dimension figure and borehole drawing：

Specification parameters OF WEIHONG Nc Studio CONTROL SYSTEM

CNC Specification

• Number of Axes Supported
  3-5axes

Control Signals

• Plus Frequency
  1MHz
• Control Mode
  Position control
• Control Signal
  Differential signals
• Position Signal Type
  Plus+Direction

Communication

• External
  PCI-E
• Interactive with Lambda
  PHOENIX bus

Spindle

• Analog Voltage Output
  0-10V

Tool Measurement

• Tool Measurement Mode
  Fixed calibration, Mobile calibration, First calibration & Calibration after the tool change

Compensation

• Compensation Type
  Screw error compensation, Backlash compensation, AQE compensation, Tool compensation

Toolpath File

• Supported File Format
  *.g/*.nc/*.u??/*.demo/*.iso/*.eng/*.cut/*.dxf/*.plt/*.txt

Operations

• WCS
  Supporting WCS G54-G59 and Work Zero saving
• Processing Technology
  Array, Mirror&rotate, Cycle machining

Convenient Operation

• Handwheel guide, Breakpoint resume, Tool selection

High-speed High-precision Optimization

• Interpolation Algorithms
  T-type, S-type and LEP algorithms

Software Language

• Chinese, English

Safety & Reliability

• Software Alarms
  Alarms of a program error, operation error, over-travel error, PLC error, and IO communication error

Packing List OF WEIHONG Nc Studio CONTROL SYSTEM

Widely applied in…

The post WEIHONG CNC Control System Card Milling Machine 4 5 Axis Controller PM95A+Lambda5S Software NcStudio For CNC Router NEWCARVE first appeared on CNC Controller.

Mounting Dimension OF WEIHONG Nc Studio CONTROL SYSTEM

Host computer dimension figure and borehole drawing：

Specification parameters OF WEIHONG Nc Studio CONTROL SYSTEM

CNC Specification

• Number of Axes Supported
  3-5axes

Control Signals

• Plus Frequency
  1MHz
• Control Mode
  Position control
• Control Signal
  Differential signals
• Position Signal Type
  Plus+Direction

Communication

• External
  PCI-E
• Interactive with Lambda
  PHOENIX bus

Spindle

• Analog Voltage Output
  0-10V

Tool Measurement

• Tool Measurement Mode
  Fixed calibration, Mobile calibration, First calibration & Calibration after tool change

Compensation

• Compensation Type
  Screw error compensation, Backlash compensation, AQE compensation, Tool compensation

Toolpath File

• Supported File Format
  *.g/*.nc/*.u??/*.demo/*.iso/*.eng/*.cut/*.dxf/*.plt/*.txt

Operations

• WCS
  Supporting WCS G54-G59 and Work Zero saving
• Processing Technology
  Array, Mirror&rotate, Cycle machining

Convenient Operation

• Handwheel guide, Breakpoint resume, Tool selection

High-speed High-precision Optimization

• Interpolation Algorithms
  T-type, S-type and LEP algorithms

Software Language

• Chinese,English

Safety & Reliability

• Software Alarms
  Alarms of program error, operation error, over-travel error, PLC error, and IO communication error

Packing List OF WEIHONG Nc Studio CONTROL SYSTEM

Widely applied in…

The post WEIHONG Nc Studio CNC Controller 3axis Control Card Pm95a-3s+Lambda3s For ATC CNC Router Woodworking Machine NEWCARVE first appeared on CNC Controller.

Mounting Dimension of WEIHONG Nc Studio V10 Controller

Host computer dimension figure and borehole drawing：

Keyboard dimension figure and borehole drawing：

Specification parameters of WEIHONG Nc Studio V10 Controller

CNC Specifications

• Number of Axes Supported
  3-5 axes

Hardware Specifications

• CPU
  Dual cores
• CPU Clock Speed
  1.6GHz
• RAM
  1GB
• Storage
  60GB
• Monitor Dimension
  10.4
• I/O
  800×600（SVGA）
• I/O
  Standard: 28/8; Extended terminal board: 8/8(non-cascade connection),10/10 (cascade connection)
• Performance Indicator
  The product stands EMI/Electrical fast transient immunity/Surge immunity tests and conforms to the fourth-grade protection standards of GB/T 17626.5-2008.
  Resistance to vibration conforms to the GB/T 2423.10-2008 Standards.
  The product stands rigid temperature tests and conforms to the industrial standards of GB/T 2423.102-2008.

Spindle

• Analog Voltage Output
  0-10V

Tool Management

• Tool Magazine
  Linear tool magazine, Disk-type tool magazine
• Tool Measurement Mode
  Auto measurement, Manual measurement
• Tool Measurement Type
  Fixed calibration, Mobile calibration, First calibration & Calibration after the tool change

Interpolation Programming

• Circular Interpolation
  Three axes linkage
  Three axes linkage
• Compensation
  Screw error compensation, Backlash compensation, AQE compensation, Tool compensation

Toolpath Program

• Supported File Format
  *.g；*.nc；*.ug;*.demo;*.iso;*.eng;*.cut;*.dxf;*.plt;*.txt

Communication

• Internet(Ethernet)
  LAN communication, Front USB interface, Two-way transmission between the system and PC

Operations

• WCS Setting
  Supporting WCS G54-G59 and 120 extended WCSs
• Processing Technology
  Array function, Mirror&rotate, Multi-layer machining, Cycle machining

Software Language

• Chinese, English

High-speed High-precision Optimization

• Interpolation Algorithms
  S-type, LEP, and Acceleration T-type algorithms

Reliability & Safety

• CNC Software Alarm
  Alarms of a program error, operation error, over-travel error, PLC error, and IO communication error

Packing List of WEIHONG Nc Studio V10 Controller

Widely applied……

The post WEIHONG Nc Studio V10 Controller CNC Router 3-axis 4-axis 5-axis Linkage Integrated Control Card NK300CX-H/HM/V/VM NEWCARVE first appeared on CNC Controller.

Product Overview of 6 Axis CNC Remote Controller

ATWGP:

CTWGP:

The key feature of 6 Axis CNC Remote Controller

 Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
2.4G wireless transmission，the transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Estop Function
To improve work efficiency and assure safety.

Axis/Step band switch 
To choose X/Y/Z/A/B/C axis or close all axis by axis switch, to choose jog step by step switch.
Reliable and Stable Performance
Low power feature，the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminum MPG is clear, the position is accurate
The ABS MPG is anti-impact and heat-resistant.

General Characteristics of 6 Axis CNC Remote Controller

Attachments of 6 Axis CNC Remote Controller

The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

Model: AWGP-3

Model: AWGP-5AA

Application of AWGP-3/5AA 5,6 Axis MPG Controller

AWGP has 2 series:

Basic model: AWGP-3, Only supports 5 axes; axis and rate does not support encoder output

Enhanced model:  AWGP-5AA, Support 6 axis; axis and rate support encoding output; support extended 3 key output.

They could be used in German （SIEMENS）、Japanese（MITSUBISHI)、France（FANUC）、Spain（FAGOR）、France NUM、Taiwan LNC、SYNTEC CNC system.

Application circuits of AWGP-3/5AA 5,6 Axis MPG Controller

Product Overview of AWGP-3/5AA 5,6 Axis MPG Controller

Basic model AWGP-3:

Enhanced model AWGP-5AA:

The key feature of AWGP-3/5AA 5,6 Axis MPG Controller

Auto Frequency Hopping When Noise. 
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
The transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.

Axis/Step band switch 
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch, to choose jog step by step switch.

Enable key
The enable key is used to enable the mpg for safety.

LCD display
The LCD display data with background light. Display the current work state of the CNC system.

General Characteristics of AWGP-3/5AA 5,6 Axis MPG Controller

Attachments of AWGP-3/5AA 5,6 Axis MPG Controller

The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

Model Number: MKX-M4

Size：184*127*30mm

Application of MKV-M4 Mach4 motion control card

Application circuits of MKV-M4 Mach4 motion control card

Product Overview of MKV-M4 Mach4 motion control card

The key feature of MKV-M4 Mach4 motion control card

1.Supporting Mach4 Hobby version

2.Support spindle speed feedback
3. Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.
4. Supports Up 6-axis, support differential output Maximum step-pulse frequency is 2000KHz
5. Status indicator LED can be useful to show the USB connection and working status by flashing.
6.16 general-purpose input
7.has speed function, the spindle actual speed Mach4 interface in the real-time display
8.all IO-port isolation, interference, stable performance

General Characteristics of MKV-M4 Mach4 motion control card

Attachments of MKV-M4 Mach4 motion control card

The post XHC Mach4 Newest Breakout Board 3 4 6 Axis USB Motion Control Card MKV-M4 2000KHz For CNC Router/ Cutting Machine NEWCARVE first appeared on CNC Controller.

Features of WHB02 USB Wireless Remote Handle:

Application circuits of WHB02 USB Wireless Remote Handle:

Product Overview of WHB02 USB Wireless Remote Handle:

General Characteristics of WHB02 USB Wireless Remote Handle:

Attachments of WHB02 USB Wireless Remote Handle:

The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.

Model: PHB04B

Standard: 183*85*32mm

Application of USB Wireless MPG-PHB04B

PHB04B has 2 series：

1、 PHB04B-4：support 4 axis with x,y,z, a
2、 PHB04B-6：support 6 axis with x,y,z,a,b,c

Based on the Windows system, provide the DLL library file for the customer for 2 times development, any numerical control system suitable for all customers.

Application circuits of USB Wireless MPG-PHB04B

Product overview and Key feature of USB Wireless MPG-PHB04B

General Characteristics of USB Wireless MPG-PHB04B

Attachments of USB Wireless MPG-PHB04B

The post XHC CNC 4 6 Axis Wireless Manual Pulse Generator MGP Controller For CNC System Machine USB Port Support Programmable NEWCARVE first appeared on CNC Controller.