Product Overview of 6 Axis CNC Remote Controller

ATWGP:

CTWGP:

The key feature of 6 Axis CNC Remote Controller

 Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
2.4G wireless transmission，the transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Estop Function
To improve work efficiency and assure safety.

Axis/Step band switch 
To choose X/Y/Z/A/B/C axis or close all axis by axis switch, to choose jog step by step switch.
Reliable and Stable Performance
Low power feature，the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminum MPG is clear, the position is accurate
The ABS MPG is anti-impact and heat-resistant.

General Characteristics of 6 Axis CNC Remote Controller

Attachments of 6 Axis CNC Remote Controller

The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

Model: AWGP-3

Model: AWGP-5AA

Application of AWGP-3/5AA 5,6 Axis MPG Controller

AWGP has 2 series:

Basic model: AWGP-3, Only supports 5 axes; axis and rate does not support encoder output

Enhanced model:  AWGP-5AA, Support 6 axis; axis and rate support encoding output; support extended 3 key output.

They could be used in German （SIEMENS）、Japanese（MITSUBISHI)、France（FANUC）、Spain（FAGOR）、France NUM、Taiwan LNC、SYNTEC CNC system.

Application circuits of AWGP-3/5AA 5,6 Axis MPG Controller

Product Overview of AWGP-3/5AA 5,6 Axis MPG Controller

Basic model AWGP-3:

Enhanced model AWGP-5AA:

The key feature of AWGP-3/5AA 5,6 Axis MPG Controller

Auto Frequency Hopping When Noise. 
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
The transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.

Axis/Step band switch 
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch, to choose jog step by step switch.

Enable key
The enable key is used to enable the mpg for safety.

LCD display
The LCD display data with background light. Display the current work state of the CNC system.

General Characteristics of AWGP-3/5AA 5,6 Axis MPG Controller

Attachments of AWGP-3/5AA 5,6 Axis MPG Controller

The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.