CNC Handwheel - CNC Controller

CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3

Chris — Mon, 01 Jul 2019 07:51:34 +0000

Package Include

1 * Remote controller

1 * Cable

1 * USB adapter

Industrial MachCNC engraving machine controller was designed for Mach system

Do not need to install any software and driver, Spring can be stretched to 3 meters

Waterproof design, very durable, anti-dirt, oil spray

Power by USB port

Dimensions: 22 x 8 x 3cm

Please note this item works with Mach 3 ONLY

The USB self-check light, you can type the ” scroll” on the keyboard to activate it.

The X, Y, Z, A buttons need setup the “HOTKEY” in the MACH3, the other buttons can work directly.

Directional motion control: X+,X-,Y+,Y-,Z+,Z-,A+,A-

Feed rate control: F+,F-

Jog rate: J+,J-

Spindle speed: speed up, slow down

Programming: E-stop,cycle start,spindle on/off,Redo,single step,original point

The post CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3 first appeared on CNC Controller.

4 6 Axis MPG Universal Pendant Handwheel Manual Pulse Generator 5V 12V 24V With Emergency Stop For CNC Router Machine NEWCARVE

Chris — Tue, 25 Jun 2019 07:13:18 +0000

Pendant Handwheel has 3 kinds:

1.Voltage 5V 100PPR.General model, adapt to 98% of the market’s 5V handwheel power supply system
2.Voltage 12V 25PPR.Suitable for Mitsubishi
3.Voltage 24V 100PPR.Suitable for PLC with 24V supply voltage

Pendant Handwheel Features :

1. Cable: (easy to open about 3 meters): imported materials, moderate hardness, can withstand more
than 300,000 times of stretching
2.Housing: New ABS material Corrosion resistant Not easy to break
3.Band switch: FD switch from Taiwan Fuhua Company

Pendant Handwheel Specification :

Unconnected wires must be cut to bare copper，then one after another parcel, Do not touch anything else lines,
components, and housing to avoid causing a short circuit.
1. Please read the manual carefully before wiring, so as not to affect the handwheel operation.
2. The encoder is unable to reverse, the voltage is too high to be burned, usually 5V, such as the new generation
of Siemens, but Mitsubishi connect 12V, PLC connect 24V.
3. The COM point is the handwheel switch public point, must be connected, otherwise, the switch will not
work properly.
4. The handwheel is light to handle, the collision is easy to be damaged, the rotating code disk and the switch
cannot be too hard, so as not to affect the service life
5. If you don’t have A -, B – signal, you don’t have to connect
6. If Mitsubishi does not have A -, B – signal, PLC does not have A -, B – signal, these signals are not connected.

The post 4 6 Axis MPG Universal Pendant Handwheel Manual Pulse Generator 5V 12V 24V With Emergency Stop For CNC Router Machine NEWCARVE first appeared on CNC Controller.

XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE

Chris — Fri, 29 Mar 2019 07:30:15 +0000

Application circuits of 6 Axis CNC Remote Controller

Product Overview of 6 Axis CNC Remote Controller

ATWGP:

CTWGP:

The key feature of 6 Axis CNC Remote Controller

Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
2.4G wireless transmission，the transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Estop Function
To improve work efficiency and assure safety.

Axis/Step band switch
To choose X/Y/Z/A/B/C axis or close all axis by axis switch, to choose jog step by step switch.
Reliable and Stable Performance
Low power feature，the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminum MPG is clear, the position is accurate
The ABS MPG is anti-impact and heat-resistant.

General Characteristics of 6 Axis CNC Remote Controller

Parameter	Description
Frequency bands	ISM，433MHZ
Supply voltage	2 AA batteries
Wireless transmission distance	40 meter
MPG Encoder	100PPR
Function Key	5 Keys
Output power	10DB
Receiver sensitivity	-98DB
Maximum axis	6 axis
Material	ABS、PC、 aluminum

Attachments of 6 Axis CNC Remote Controller

CTWGP Wireless MPG	1 piece
Handle	1 piece
Wireless receiver	1 piece
antenna	1 piece
WGP manual	1 book
Package box size	29020563mm
Weight	0.9kg

The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE

Chris — Fri, 29 Mar 2019 07:19:43 +0000

The fundamental type of wireless MPG-AWGP3/5AA

Model: AWGP-3

Model: AWGP-5AA

Application of AWGP-3/5AA 5,6 Axis MPG Controller

AWGP has 2 series:

Basic model: AWGP-3, Only supports 5 axes; axis and rate does not support encoder output

Enhanced model: AWGP-5AA, Support 6 axis; axis and rate support encoding output; support extended 3 key output.

They could be used in German （SIEMENS）、Japanese（MITSUBISHI)、France（FANUC）、Spain（FAGOR）、France NUM、Taiwan LNC、SYNTEC CNC system.

Application circuits of AWGP-3/5AA 5,6 Axis MPG Controller

Product Overview of AWGP-3/5AA 5,6 Axis MPG Controller

Basic model AWGP-3:

Enhanced model AWGP-5AA:

The key feature of AWGP-3/5AA 5,6 Axis MPG Controller

Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
The transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.

Axis/Step band switch
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch, to choose jog step by step switch.

Enable key
The enable key is used to enable the mpg for safety.

LCD display
The LCD display data with background light. Display the current work state of the CNC system.

General Characteristics of AWGP-3/5AA 5,6 Axis MPG Controller

Parameter	Description
Frequency bands	ISM,433MHZ
Supply voltage	2 AA batteries
Wireless transmission distance	40 meter
MPG Encoder	100PPR
Function Key	3 Keys
RF TX power	10DB
Receiver sensitivity	-98DB
Maximum axis	5/6 axis
LCD	128*68 Dot LCD with background
Material	ABS、PC、aluminium

Attachments of AWGP-3/5AA 5,6 Axis MPG Controller

AWGP Wireless MPG	1piece
Handle	1 piece
Wireless Receiver	1 piece
AWGP Manual	1 book
Package box size	23522585mm
Weight	0.9kg

The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE

Chris — Fri, 29 Mar 2019 06:35:03 +0000

Features of WHB02 USB Wireless Remote Handle:

Performance or Parameters Description:

WHB02 Wireless Handwheel is a new product for NC Studio System and Card. It is widely used in furniture

production engraving machine, advertising field processing, stone processing. Apply for Weihong NCStudio5.449,

NCStudio8.202 versions and so on.

It has a step value indication, you can easily indicate the step value indicate 1X, 10X for the current sculpture,

or continuous state.

High-speed instruction

Boot power indicator, handle battery under voltage alarm indication; Operation key part: handle with integrated

common machine operator key functions

Feed adjuster

Start / pause function.

X, Y, Z axis adjustment;

X, Y, Z axis fine-tuning;

X, Y, Z axis clear function;

Floating knife function;

The spindle on/off function;

Back to mechanical origin function;

Back workpiece origin function;

Carving open file feature, select File carving and much more.

Working Principle:

The traditional engraving machine, you need work for engraving machine with computer, the worker need to cooperate

between the engraving machine and computer. working inefficiency and operation is not convenient. And WHB02

wireless controller, which is equivalent to a handheld computer to the operator, standing directly in front engraving

the machine, engraving machine can operate normally, and bring great convenience for work.

Function:

1, Supports 3-axis position adjustment

2, Having a processing start, stop, machining feed adjusting spindle open stop functions

3, Look into the barrier transmission distance: 60 meters

4, Support the same room, 64 sets of remote control simultaneously, with no interference

5, With the low-power design, 2 AAA batteries, can be used two months

Application circuits of WHB02 USB Wireless Remote Handle:

Product Overview of WHB02 USB Wireless Remote Handle:

General Characteristics of WHB02 USB Wireless Remote Handle:

Parameter	Description
Frequency bands	ISM，443MHZ
Supply voltage	2 AA batteries
Function Key	31 Keys
Wireless transmission distance	40 meter
RF TX power	10DB
Receiver sensitivity	-98DB
Maximum axis	3 axis
Material	ABS、PC

Attachments of WHB02 USB Wireless Remote Handle:

WHB02 Wireless MPG	1piece
USB receiver	1piece
Driver disk	1 disk
Guarantee card	1 paper
user manual	1 book
Package box size	26512575mm
Weight	0.7kg

The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.

XHC CNC 4 6 Axis Wireless Manual Pulse Generator MGP Controller For CNC System Machine USB Port Support Programmable NEWCARVE

Chris — Fri, 29 Mar 2019 03:44:16 +0000

USB Wireless MPG-PHB04B

Model: PHB04B

Standard: 183*85*32mm

Application of USB Wireless MPG-PHB04B

PHB04B has 2 series：

1、 PHB04B-4：support 4 axis with x,y,z, a
2、 PHB04B-6：support 6 axis with x,y,z,a,b,c

Based on the Windows system, provide the DLL library file for the customer for 2 times development, any numerical control system suitable for all customers.

Application circuits of USB Wireless MPG-PHB04B

Product overview and Key feature of USB Wireless MPG-PHB04B

General Characteristics of USB Wireless MPG-PHB04B

Parameter	Description
Frequency bands	ISM，433MHZ
Supply voltage	2 AA batteries
Wireless transmission distance/td>	40 meter
MPG Encoder	100PPR
Function Key	13 Keys
RF TX power	10DB
Receiver sensitivity	-98DB
Maximum axis	6 axis
LCD	128*68 Dot LCD with background
Material	ABS、PC、aluminium

Attachments of USB Wireless MPG-PHB04B

PHB04B Wireless MPG	1piece
Handle	1piece
USB receiver	1piece
Driver disk	1 disk
Guarantee CARD	1 paper
Package box size	22016860mm
Weight	0.6KG

The post XHC CNC 4 6 Axis Wireless Manual Pulse Generator MGP Controller For CNC System Machine USB Port Support Programmable NEWCARVE first appeared on CNC Controller.

XHC Remote Controller PHB02B CNC Machine Wireless Remote Control PHB02B NEWCARVE

Chris — Fri, 29 Mar 2019 03:35:53 +0000

Application circuits of PHB02B Wireless Remote Controller

Product overview and Key feature of PHB02B Wireless Remote Controller

General Characteristics of PHB02B Wireless Remote Controller

Parameter	Description
Frequency bands	ISM，433MHZ
Supply voltage	2 AA batteries
Wireless transmission distance	40 meter
Function Key	32 Keys
RF TX power	10DB
Receiver sensitivity	-98DB
LCD	128*68 Dot LCD with background
Material	ABS、PC、aluminium

5、Attachments of PHB02B Wireless Remote Controller

PHB02B Wireless MPG	1piece
USB receiver	1 piece
Driver disk	1 disk
Guarantee CARD	1 paper
Package box size	22016860mm
Weight	0.6kg

The post XHC Remote Controller PHB02B CNC Machine Wireless Remote Control PHB02B NEWCARVE first appeared on CNC Controller.

XHC Remote Controller PHB02 For CNC System Factory, USB Wireless Handhold Pendant For Laser Cutting/Engraving Machine NEWCARVE

Chris — Thu, 28 Mar 2019 10:15:39 +0000

The key type CNC remote controller-PHB02

Model: PHB02 Standard: 144*74*24mm

Application of PHB02 Remote Controller

PHB02 has 2 series：1. PHB02：The USB interface.2. PHB02-RS: provide an RS232 communication interface.

Based on the Windows system, provide the DLL library file for the customer for 2 times development, suitable for customers all kinds of CNC system.

Application circuits of PHB02 Remote Controller

Product overview and Key feature of PHB02 Remote Controller

General Characteristics of PHB02 Remote Controller

Parameter	Description
Frequency bands	ISM，433MHZ
Supply voltage	2 AA batteries
Wireless transmission distance	40 meter
Function Key	31 Keys
RF TX power	10DB
Receiver sensitivity	-98DB
LCD	128*68 Dot LCD with background
Material	ABS、PC、aluminium

Attachments of PHB02 Remote Controller

PHB02 Wireless device	1 piece
USB receiver	1 piece
Driver disk	1 disk
Guarantee CARD	1 paper
Package box size	21316055mm
Weight	0.4KG

The post XHC Remote Controller PHB02 For CNC System Factory, USB Wireless Handhold Pendant For Laser Cutting/Engraving Machine NEWCARVE first appeared on CNC Controller.

XHC CNC Handwheel Wireless Mach3 MPG Handwheel For Milling Machine 4 6 Axis MPG WHB04B-4 WHB04B-6 NEACARVE

Chris — Thu, 28 Mar 2019 09:58:43 +0000

1. Application of WHB04B Mach3 MPG Handwheel

WHB04B-4: 4 axes, support 4 axes with x,y,z, a

WHB04B-6: 6 axes, support 6 axes with x,y,z,a,b,c

CNC machine tool for all Mach3 systems in a Windows environment

2. Application circuit of WHB04B Mach3 MPG Handwheel

3. Product Overview of WHB04B Mach3 MPG Handwheel

4. The key feature of WHB04B Mach3 MPG Handwheel

LCD display

Display the machine coordinate and workpiece coordinate of the X Y Z A axis.

Display spindle speed value, machining feed speed value.

Dot matrix LCD with backlight

Axis selection, rate band switch control

The axis selection band switch realizes the closing of the electronic handwheel and the selection control of the corresponding X Y Z A axis functions.

The selection of the band switch realizes the selection of the step value, which is simple and convenient.

5. General Characteristics of WHB04B Mach3 MPG Handwheel

MPG Encoder	100PPR
USB cable	5m
Function Key	18 Keys
Maximum axis	6 axis
LCD	128*68 Dot LCD with background
Material	ABS、PC、aluminium

6. Attachments of WHB04B Mach3 MPG Handwheel

LHB04B Wireless MPG	1piece
Handle	1piece
USB receiver	1piece
Driver disk	1张
Guarantee CARD	1 paper
WHB03L user manual	1 book
Package box size	26512375mm
Weight	0.75KG

The post XHC CNC Handwheel Wireless Mach3 MPG Handwheel For Milling Machine 4 6 Axis MPG WHB04B-4 WHB04B-6 NEACARVE first appeared on CNC Controller.

XHC Newest Mach3 Wired MPG Pendant Handwheel CNC Controller For 4/6 Axis Engraving Machine NEWCARVE

Chris — Wed, 27 Mar 2019 12:02:09 +0000

Application circuit of LHB04B MPG Pendant Handwheel Controller

Product Overview of LHB04B MPG Pendant Handwheel Controller

The key feature of LHB04B MPG Pendant Handwheel Controller

1, LCD display

Display the machine coordinate and workpiece coordinate of the X Y Z A axis.

Display spindle speed value, machining feed speed value.

Dot matrix LCD with backlight

2, Axis selection, rate band switch control

The axis selection band switch realizes the closing of the electronic handwheel and the selection control of the corresponding X Y Z A axis functions.

The selection of the band switch realizes the selection of the step value, which is simple and convenient.

General Characteristics of LHB04B MPG Pendant Handwheel Controller

MPG Encoder	100PPR
USB cable	5m
Function Key	18 Keys
Maximum axis	6 axis
LCD	128*68 Dot LCD with background
Material	ABS、PC、aluminium

Attachments of LHB04B MPG Pendant Handwheel Controller

LHB04B Wireless MPG	1piece
Handle	1piece
USB receiver	1piece
Driver disk	1张
Guarantee CARD	1 paper
WHB03L user manual	1 book
Package box size	26512375mm
Weight	0.75KG

The post XHC Newest Mach3 Wired MPG Pendant Handwheel CNC Controller For 4/6 Axis Engraving Machine NEWCARVE first appeared on CNC Controller.