The post CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3 first appeared on CNC Controller.
]]>The post CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3 first appeared on CNC Controller.
]]>Version and wiring diagram for free !!!------(send by Email)
Suitable system: XP
Suitable computer: support desktop computer with have PCI, not support Lap-top
The post Ncstudio Controller 3 Axis Nc Studio System For CNC Router 5.4.49 /5.5.55/ 5.5.60 English Version NEWCARVE first appeared on CNC Controller.
]]>1 pcs 15 pin breakout board
1 pcs control card
1 pcs 3-meter cable
Support version: English Version 5.4.49/5.5.55/5.5.60
Version and wiring diagram for free !!!——(send by Email)
Suitable system: XP
Suitable computer: support desktop computer with have PCI, not support Lap-top
15 pin breakout board
7mm diameter cable
8-year rich manufacture experience
steady quality and perfect production
widely used on various CNC routers, and CNC engraving and milling machine for cutting, engraving, molding processing, advertising products manufacturing, etc.
3 axis 0501 DSP controller(CLICK HERE)
Nc studio wireless channel(CLICK HERE)
A15S A15E Multi-Spindle DSP controller(CLICK HERE)
The post Ncstudio Controller 3 Axis Nc Studio System For CNC Router 5.4.49 /5.5.55/ 5.5.60 English Version NEWCARVE first appeared on CNC Controller.
]]>The post 4 6 Axis MPG Universal Pendant Handwheel Manual Pulse Generator 5V 12V 24V With Emergency Stop For CNC Router Machine NEWCARVE first appeared on CNC Controller.
]]>1.Voltage 5V 100PPR.General model, adapt to 98% of the market’s 5V handwheel power supply system
2.Voltage 12V 25PPR.Suitable for Mitsubishi
3.Voltage 24V 100PPR.Suitable for PLC with 24V supply voltage
1. Cable: (easy to open about 3 meters): imported materials, moderate hardness, can withstand more
than 300,000 times of stretching
2.Housing: New ABS material Corrosion resistant Not easy to break
3.Band switch: FD switch from Taiwan Fuhua Company
Unconnected wires must be cut to bare copper,then one after another parcel, Do not touch anything else lines,
components, and housing to avoid causing a short circuit.
1. Please read the manual carefully before wiring, so as not to affect the handwheel operation.
2. The encoder is unable to reverse, the voltage is too high to be burned, usually 5V, such as the new generation
of Siemens, but Mitsubishi connect 12V, PLC connect 24V.
3. The COM point is the handwheel switch public point, must be connected, otherwise, the switch will not
work properly.
4. The handwheel is light to handle, the collision is easy to be damaged, the rotating code disk and the switch
cannot be too hard, so as not to affect the service life
5. If you don’t have A -, B – signal, you don’t have to connect
6. If Mitsubishi does not have A -, B – signal, PLC does not have A -, B – signal, these signals are not connected.
The post 4 6 Axis MPG Universal Pendant Handwheel Manual Pulse Generator 5V 12V 24V With Emergency Stop For CNC Router Machine NEWCARVE first appeared on CNC Controller.
]]>The post WEIHONG CNC Control System Card Milling Machine 4 5 Axis Controller PM95A+Lambda5S Software NcStudio For CNC Router NEWCARVE first appeared on CNC Controller.
]]>
Host computer dimension figure and borehole drawing:
CNC Specification
Control Signals
Communication
Spindle
Tool Measurement
Compensation
Toolpath File
Operations
Convenient Operation
High-speed High-precision Optimization
Software Language
Safety & Reliability
Widely applied in…
The post WEIHONG CNC Control System Card Milling Machine 4 5 Axis Controller PM95A+Lambda5S Software NcStudio For CNC Router NEWCARVE first appeared on CNC Controller.
]]>The post WEIHONG Nc Studio CNC Controller 3axis Control Card Pm95a-3s+Lambda3s For ATC CNC Router Woodworking Machine NEWCARVE first appeared on CNC Controller.
]]>
Host computer dimension figure and borehole drawing:
CNC Specification
Control Signals
Communication
Spindle
Tool Measurement
Compensation
Toolpath File
Operations
Convenient Operation
High-speed High-precision Optimization
Software Language
Safety & Reliability
Widely applied in…
The post WEIHONG Nc Studio CNC Controller 3axis Control Card Pm95a-3s+Lambda3s For ATC CNC Router Woodworking Machine NEWCARVE first appeared on CNC Controller.
]]>The post WEIHONG Nc Studio V10 Controller CNC Router 3-axis 4-axis 5-axis Linkage Integrated Control Card NK300CX-H/HM/V/VM NEWCARVE first appeared on CNC Controller.
]]>
Host computer dimension figure and borehole drawing:
Keyboard dimension figure and borehole drawing:
CNC Specifications
Hardware Specifications
Spindle
Tool Management
Interpolation Programming
Toolpath Program
Communication
Operations
Software Language
High-speed High-precision Optimization
Reliability & Safety
Widely applied……
The post WEIHONG Nc Studio V10 Controller CNC Router 3-axis 4-axis 5-axis Linkage Integrated Control Card NK300CX-H/HM/V/VM NEWCARVE first appeared on CNC Controller.
]]>Model: CTWGP/ATWGP Size:183*85*32mm
Application: hey could be used in German (SIEMENS)、Japanese(MITSUBISHI)、France(FANUC)、Spain(FAGOR)、France NUM、Taiwan LNC、SYNTEC CNC system.
The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>ATWGP:
CTWGP:
Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB,High receiver sensitivity -98DB.
32 hopping channels,the channel frequency gap is 1Mhz.
2.4G wireless transmission,the transmission is encrypted, auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Estop Function
To improve work efficiency and assure safety.
Axis/Step band switch
To choose X/Y/Z/A/B/C axis or close all axis by axis switch, to choose jog step by step switch.
Reliable and Stable Performance
Low power feature,the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminum MPG is clear, the position is accurate
The ABS MPG is anti-impact and heat-resistant.
Parameter | Description |
Frequency bands | ISM,433MHZ |
Supply voltage | 2 AA batteries |
Wireless transmission distance | 40 meter |
MPG Encoder | 100PPR |
Function Key | 5 Keys |
Output power | 10DB |
Receiver sensitivity | -98DB |
Maximum axis | 6 axis |
Material | ABS、PC、 aluminum |
CTWGP Wireless MPG | 1 piece |
Handle | 1 piece |
Wireless receiver | 1 piece |
antenna | 1 piece |
WGP manual | 1 book |
Package box size | 290*205*63mm |
Weight | 0.9kg |
The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>Model: AWGP-3
Model: AWGP-5AA
AWGP has 2 series:
Basic model: AWGP-3, Only supports 5 axes; axis and rate does not support encoder output
Enhanced model: AWGP-5AA, Support 6 axis; axis and rate support encoding output; support extended 3 key output.
They could be used in German (SIEMENS)、Japanese(MITSUBISHI)、France(FANUC)、Spain(FAGOR)、France NUM、Taiwan LNC、SYNTEC CNC system.
Basic model AWGP-3:
Enhanced model AWGP-5AA:
Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB,High receiver sensitivity -98DB.
32 hopping channels,the channel frequency gap is 1Mhz.
The transmission is encrypted, auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Axis/Step band switch
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch, to choose jog step by step switch.
Enable key
The enable key is used to enable the mpg for safety.
LCD display
The LCD display data with background light. Display the current work state of the CNC system.
Parameter | Description |
Frequency bands | ISM,433MHZ |
Supply voltage | 2 AA batteries |
Wireless transmission distance | 40 meter |
MPG Encoder | 100PPR |
Function Key | 3 Keys |
RF TX power | 10DB |
Receiver sensitivity | -98DB |
Maximum axis | 5/6 axis |
LCD | 128*68 Dot LCD with background |
Material | ABS、PC、aluminium |
AWGP Wireless MPG | 1piece |
Handle | 1 piece |
Wireless Receiver | 1 piece |
AWGP Manual | 1 book |
Package box size | 235*225*85mm |
Weight | 0.9kg |
The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>The post XHC Mach4 Newest Breakout Board 3 4 6 Axis USB Motion Control Card MKV-M4 2000KHz For CNC Router/ Cutting Machine NEWCARVE first appeared on CNC Controller.
]]>Model Number: MKX-M4
Size:184*127*30mm
1.Supporting Mach4 Hobby version
2.Support spindle speed feedback
3. Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.
4. Supports Up 6-axis, support differential output Maximum step-pulse frequency is 2000KHz
5. Status indicator LED can be useful to show the USB connection and working status by flashing.
6.16 general-purpose input
7.has speed function, the spindle actual speed Mach4 interface in the real-time display
8.all IO-port isolation, interference, stable performance
Parameter | Description | |
Axis drive control | Isolated oc output | Voltage:5V,maximum load:20A |
type | STEP/DIR | |
Maximum Step frequency | 2000KHZ | |
Number of the support axis | MK3-M4:3 axis
MK4-M4:4 axis MK6-M4:6 axis |
|
Spindle control | Analog output voltage | 0-10V |
Digital PWM output | 5V,1KHZ,fill factor:%1-100% | |
STEP/DIR | Min frequncy:15Hz
Max frequncy:4KHz |
|
8 digital output | Maximum load of the output line | 50mA |
The maximum voltage on the outline | 25V | |
16 digital input | Maximum load of the input line | 5mA |
maximum voltage on input line | 25V | |
PC connection | Standard USB2.0 |
MKX-M4 motion card | 1 piece |
Use wire | 1 piece |
Driver disk | 1 disk |
MACH4-USB troubleshooting | 1 book |
MACH4 config and driver installation | 1 book |
MKX –M4 user Manual | 1 book |
Package box size | 275*144*42mm |
weight | 0.7KG |
The post XHC Mach4 Newest Breakout Board 3 4 6 Axis USB Motion Control Card MKV-M4 2000KHz For CNC Router/ Cutting Machine NEWCARVE first appeared on CNC Controller.
]]>The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.
]]>Performance or Parameters Description:
WHB02 Wireless Handwheel is a new product for NC Studio System and Card. It is widely used in furniture
production engraving machine, advertising field processing, stone processing. Apply for Weihong NCStudio5.449,
NCStudio8.202 versions and so on.
It has a step value indication, you can easily indicate the step value indicate 1X, 10X for the current sculpture,
or continuous state.
High-speed instruction
Boot power indicator, handle battery under voltage alarm indication; Operation key part: handle with integrated
common machine operator key functions
Feed adjuster
Start / pause function.
X, Y, Z axis adjustment;
X, Y, Z axis fine-tuning;
X, Y, Z axis clear function;
Floating knife function;
The spindle on/off function;
Back to mechanical origin function;
Back workpiece origin function;
Carving open file feature, select File carving and much more.
Working Principle:
The traditional engraving machine, you need work for engraving machine with computer, the worker need to cooperate
between the engraving machine and computer. working inefficiency and operation is not convenient. And WHB02
wireless controller, which is equivalent to a handheld computer to the operator, standing directly in front engraving
the machine, engraving machine can operate normally, and bring great convenience for work.
Function:
1, Supports 3-axis position adjustment
2, Having a processing start, stop, machining feed adjusting spindle open stop functions
3, Look into the barrier transmission distance: 60 meters
4, Support the same room, 64 sets of remote control simultaneously, with no interference
5, With the low-power design, 2 AAA batteries, can be used two months
Parameter | Description |
Frequency bands | ISM,443MHZ |
Supply voltage | 2 AA batteries |
Function Key | 31 Keys |
Wireless transmission distance | 40 meter |
RF TX power | 10DB |
Receiver sensitivity | -98DB |
Maximum axis | 3 axis |
Material | ABS、PC |
WHB02 Wireless MPG | 1piece |
USB receiver | 1piece |
Driver disk | 1 disk |
Guarantee card | 1 paper |
user manual | 1 book |
Package box size | 265*125*75mm |
Weight | 0.7kg |
The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.
]]>