Mach3 - CNC Controller

CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3

Chris — Mon, 01 Jul 2019 07:51:34 +0000

Package Include

1 * Remote controller

1 * Cable

1 * USB adapter

Industrial MachCNC engraving machine controller was designed for Mach system

Do not need to install any software and driver, Spring can be stretched to 3 meters

Waterproof design, very durable, anti-dirt, oil spray

Power by USB port

Dimensions: 22 x 8 x 3cm

Please note this item works with Mach 3 ONLY

The USB self-check light, you can type the ” scroll” on the keyboard to activate it.

The X, Y, Z, A buttons need setup the “HOTKEY” in the MACH3, the other buttons can work directly.

Directional motion control: X+,X-,Y+,Y-,Z+,Z-,A+,A-

Feed rate control: F+,F-

Jog rate: J+,J-

Spindle speed: speed up, slow down

Programming: E-stop,cycle start,spindle on/off,Redo,single step,original point

The post CNC Mach3 4 Axis Manual remote Control USB Pendant DSP JOG encoder for Mach3 first appeared on CNC Controller.

XHC MK4 Mach3 Breakout Board 6 Axis USB Motion Control Card 2MHz Support Windows 7,10 NEWCARVE

Chris — Sat, 16 Mar 2019 06:34:37 +0000

Package Contents of XHC MK4 Mach3 USB Motion Control Card:

1 x CNC Mach3 USB 6 Axis Motion Control Card

1 x USB Cable

1 x cd (mach3 version3.043.066 licence, instruction,)

1 x English Manual

Description of XHC MK4 Mach3 USB Motion Control Card:

1. Dual-Processors, ARM+FPGA, More processing power

2. Support all versions of Mach3 (can’t work with Mach4).

3. Work under 32-bit Windows ( 98, Vista,7, 10) operating system (not including Mac OS)

4. USB jack does not need to install the driver, plug and play under all versions of Windows.

5. Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.

6. Supports 6-axis linkage.

7. Maximum step-pulse frequency is 2000 KHz, can connect servo driver/stepper, driver.

8. The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.

9. 16 inputs.

10. Onboard isolated power supply, not need an external power supply.

11. All IO port fully isolated, strong anti-interference, stable performance.

12. Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.

13. Support XHC series of wireless electronic mach3 MPG, such as WHB04 MPG.

14. With an aluminum shell, effectively shielding interference, stable and reliable performance.

Electrical Characteristics of XHC MK4 Mach3 USB Motion Control Card:

Parameter Description
CPU	Dual-Processors, ARM+FPGA
Axis output control	Drive Current	Isolated open collector output; 5V, 20mA
	Drive	Pulse + direction output
	Output frequency	2000 kHz
	Axis	6-axis
	Isolation Voltage	3.5KV
Spindle inverter output	Analog voltage output	0-10V
	PWM output	5V, 1KHZ, Duty; 0-100%
	Pulse + direction output	5V, 15HZ to 4 kHz
Spindle speed input	Input	Isolated input, 5V pulse signal
Spindle speed input	Isolation Voltage	3.5KV
8 IO output	Drive Current	Isolation: 50mA, 25V
8 IO output	Isolation Voltage	3.5KV
16 IO input	Input Current	Isolated inputs, 5 mA, maximum voltage 25V
	Isolation Voltage	3.5KV
	Mach3 Port Position	P1 Port
USB interface	Complies with USB2.0 standard

The post XHC MK4 Mach3 Breakout Board 6 Axis USB Motion Control Card 2MHz Support Windows 7,10 NEWCARVE first appeared on CNC Controller.

XHC MK4 Mach3 Breakout Board 3 Axis USB Motion Control Card 2MHz Support Windows 7,10 NEWCARVE Mach3 Control System

Chris — Sat, 16 Mar 2019 06:14:27 +0000

Description of XHC MK4 Mach3 USB Motion Control Card:

This is the latest generation 3 Axis motion control card, which is the fourth generation calling MK3-IV. The maximum

step-pulse frequency is 2000 kHz ( The last generation MK3-III is 400KHz). Now MK3-IV is stronger,

more stable and better performance.

Features of XHC MK4 Mach3 USB Motion Control Card:

1.Dual-Processors, ARM+FPGA, More processing power

2. Support all versions of Mach3 (can’t work with Mach4).

3.Work under Windows 32-bit operating system (not including Mac OS)

4.USB jack does not need to install the driver, plug and play under all versions of Windows.

5.Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.

6.Supports3-axis linkage.

7. Maximum step-pulse frequency is 2 MHz, can connect servo driver/stepper, driver.

8. The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.

9.16 inputs.

10. Onboard isolated power supply, not need an external power supply.

11.All IO port fully isolated, strong anti-interference, stable performance.

12.Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.

13.Support XHC series of wireless electronic mach3 MPG, such as whb04 mpg.

14. With an aluminum shell, effectively shielding interference, stable and reliable performance.

Package Contents of XHC MK4 Mach3 USB Motion Control Card:

1 * CNC Mach3 USB 3 Axis Motion Control Card

1 * USB Cable

1 * English Manual

The software will be sent by email.

Interface Schematics of XHC MK4 Mach3 USB Motion Control Card:

Simple Connection Description of XHC MK4 Mach3 USB Motion Control Card:

1. Application Connection Diagram

2. Motion control card Dimensions

184 * 110 *30 mm

3.Electrical Characteristics

Parameter description
CPU	Dual-Processors,ARM+FPGA
Axis output control	drive Current	Isolated open collector output; 5V, 20mA
	drive	pulse + direction output
	Output Frequency	2000 kHz
	Axis	3 – Axis
	Isolation Voltage	3.5kv
Spindle inverter output	Analog voltage output	0 – 10v
	PWM output	5v, 1, 0 – 100% duty;
	pulse + direction output	5v, 15hz is 4 kHz
Spindle speed input	input	Isolated input, a 5V pulse signal
Spindle speed input	Isolation Voltage	3.5kv
8 i output	drive Current	Isolation: 50mA, 25V
8 i output	Isolation Voltage	3.5kv
16 i input	input current	Isolated inputs, 5 mA, maximum voltage 25V
	Isolation Voltage	3.5kv
	Mach3 Port Position	P1 Port
USB Interface	Complies with USB2.0 standard

The post XHC MK4 Mach3 Breakout Board 3 Axis USB Motion Control Card 2MHz Support Windows 7,10 NEWCARVE Mach3 Control System first appeared on CNC Controller.