1.Voltage 5V 100PPR.General model, adapt to 98% of the market’s 5V handwheel power supply system
2.Voltage 12V 25PPR.Suitable for Mitsubishi
3.Voltage 24V 100PPR.Suitable for PLC with 24V supply voltage

Pendant Handwheel Features :

1. Cable: (easy to open about 3 meters): imported materials, moderate hardness, can withstand more
than 300,000 times of stretching
2.Housing: New ABS material Corrosion resistant Not easy to break
3.Band switch: FD switch from Taiwan Fuhua Company

Pendant Handwheel Specification :

Unconnected wires must be cut to bare copper，then one after another parcel, Do not touch anything else lines,
components, and housing to avoid causing a short circuit.
1. Please read the manual carefully before wiring, so as not to affect the handwheel operation.
2. The encoder is unable to reverse, the voltage is too high to be burned, usually 5V, such as the new generation
of  Siemens, but Mitsubishi connect 12V, PLC connect 24V.
3. The COM point is the handwheel switch public point, must be connected, otherwise, the switch will not
work properly.
4. The handwheel is light to handle, the collision is easy to be damaged, the rotating code disk and the switch
cannot be too hard, so as not to affect the service life
5. If you don’t have A -, B – signal, you don’t have to connect
6. If Mitsubishi does not have A -, B – signal, PLC does not have A -, B – signal, these signals are not connected.

The post 4 6 Axis MPG Universal Pendant Handwheel Manual Pulse Generator 5V 12V 24V With Emergency Stop For CNC Router Machine NEWCARVE first appeared on CNC Controller.

Product Overview of 6 Axis CNC Remote Controller

ATWGP:

CTWGP:

The key feature of 6 Axis CNC Remote Controller

 Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
2.4G wireless transmission，the transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Estop Function
To improve work efficiency and assure safety.

Axis/Step band switch 
To choose X/Y/Z/A/B/C axis or close all axis by axis switch, to choose jog step by step switch.
Reliable and Stable Performance
Low power feature，the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminum MPG is clear, the position is accurate
The ABS MPG is anti-impact and heat-resistant.

General Characteristics of 6 Axis CNC Remote Controller

Attachments of 6 Axis CNC Remote Controller

The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

Model: AWGP-3

Model: AWGP-5AA

Application of AWGP-3/5AA 5,6 Axis MPG Controller

AWGP has 2 series:

Basic model: AWGP-3, Only supports 5 axes; axis and rate does not support encoder output

Enhanced model:  AWGP-5AA, Support 6 axis; axis and rate support encoding output; support extended 3 key output.

They could be used in German （SIEMENS）、Japanese（MITSUBISHI)、France（FANUC）、Spain（FAGOR）、France NUM、Taiwan LNC、SYNTEC CNC system.

Application circuits of AWGP-3/5AA 5,6 Axis MPG Controller

Product Overview of AWGP-3/5AA 5,6 Axis MPG Controller

Basic model AWGP-3:

Enhanced model AWGP-5AA:

The key feature of AWGP-3/5AA 5,6 Axis MPG Controller

Auto Frequency Hopping When Noise. 
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
The transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.

Axis/Step band switch 
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch, to choose jog step by step switch.

Enable key
The enable key is used to enable the mpg for safety.

LCD display
The LCD display data with background light. Display the current work state of the CNC system.

General Characteristics of AWGP-3/5AA 5,6 Axis MPG Controller

Attachments of AWGP-3/5AA 5,6 Axis MPG Controller

The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.

Model Number: MKX-M4

Size：184*127*30mm

Application of MKV-M4 Mach4 motion control card

Application circuits of MKV-M4 Mach4 motion control card

Product Overview of MKV-M4 Mach4 motion control card

The key feature of MKV-M4 Mach4 motion control card

1.Supporting Mach4 Hobby version

2.Support spindle speed feedback
3. Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.
4. Supports Up 6-axis, support differential output Maximum step-pulse frequency is 2000KHz
5. Status indicator LED can be useful to show the USB connection and working status by flashing.
6.16 general-purpose input
7.has speed function, the spindle actual speed Mach4 interface in the real-time display
8.all IO-port isolation, interference, stable performance

General Characteristics of MKV-M4 Mach4 motion control card

Attachments of MKV-M4 Mach4 motion control card

The post XHC Mach4 Newest Breakout Board 3 4 6 Axis USB Motion Control Card MKV-M4 2000KHz For CNC Router/ Cutting Machine NEWCARVE first appeared on CNC Controller.

Features of WHB02 USB Wireless Remote Handle:

Application circuits of WHB02 USB Wireless Remote Handle:

Product Overview of WHB02 USB Wireless Remote Handle:

General Characteristics of WHB02 USB Wireless Remote Handle:

Attachments of WHB02 USB Wireless Remote Handle:

The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.

Model: PHB04B

Standard: 183*85*32mm

Application of USB Wireless MPG-PHB04B

PHB04B has 2 series：

1、 PHB04B-4：support 4 axis with x,y,z, a
2、 PHB04B-6：support 6 axis with x,y,z,a,b,c

Based on the Windows system, provide the DLL library file for the customer for 2 times development, any numerical control system suitable for all customers.

Application circuits of USB Wireless MPG-PHB04B

Product overview and Key feature of USB Wireless MPG-PHB04B

General Characteristics of USB Wireless MPG-PHB04B

Attachments of USB Wireless MPG-PHB04B

The post XHC CNC 4 6 Axis Wireless Manual Pulse Generator MGP Controller For CNC System Machine USB Port Support Programmable NEWCARVE first appeared on CNC Controller.

Product overview and Key feature of PHB02B Wireless Remote Controller 

General Characteristics of PHB02B Wireless Remote Controller 

5、Attachments of PHB02B Wireless Remote Controller 

The post XHC Remote Controller PHB02B CNC Machine Wireless Remote Control PHB02B NEWCARVE first appeared on CNC Controller.

Model: PHB02            Standard: 144*74*24mm

Application of PHB02 Remote Controller

PHB02 has 2 series：1. PHB02：The USB interface.2. PHB02-RS: provide an RS232 communication interface.

Based on the Windows system, provide the DLL library file for the customer for 2 times development, suitable for customers all kinds of CNC system.

Application circuits of PHB02 Remote Controller

Product overview and Key feature of PHB02 Remote Controller

General Characteristics of PHB02 Remote Controller

Attachments of PHB02 Remote Controller

The post XHC Remote Controller PHB02 For CNC System Factory, USB Wireless Handhold Pendant For Laser Cutting/Engraving Machine NEWCARVE first appeared on CNC Controller.

WHB04B-4: 4 axes, support 4 axes with x,y,z, a

WHB04B-6: 6 axes, support 6 axes with x,y,z,a,b,c

CNC machine tool for all Mach3 systems in a Windows environment

2. Application circuit of WHB04B Mach3 MPG Handwheel

3. Product Overview of WHB04B Mach3 MPG Handwheel

4. The key feature of WHB04B Mach3 MPG Handwheel

LCD display

Display the machine coordinate and workpiece coordinate of the X Y Z A axis.

Display spindle speed value, machining feed speed value.

Dot matrix LCD with backlight

Axis selection, rate band switch control

The axis selection band switch realizes the closing of the electronic handwheel and the selection control of the corresponding X Y Z A axis functions.

The selection of the band switch realizes the selection of the step value, which is simple and convenient.

5. General Characteristics of WHB04B Mach3 MPG Handwheel

6. Attachments of WHB04B Mach3 MPG Handwheel

The post XHC CNC Handwheel Wireless Mach3 MPG Handwheel For Milling Machine 4 6 Axis MPG WHB04B-4 WHB04B-6 NEACARVE first appeared on CNC Controller.

Product Overview of LHB04B MPG Pendant Handwheel Controller

The key feature of LHB04B MPG Pendant Handwheel Controller

1, LCD display

Display the machine coordinate and workpiece coordinate of the X Y Z A axis.

Display spindle speed value, machining feed speed value.

Dot matrix LCD with backlight

2, Axis selection, rate band switch control

The axis selection band switch realizes the closing of the electronic handwheel and the selection control of the corresponding X Y Z A axis functions.

The selection of the band switch realizes the selection of the step value, which is simple and convenient.

General Characteristics of LHB04B MPG Pendant Handwheel Controller

Attachments of LHB04B MPG Pendant Handwheel Controller

The post XHC Newest Mach3 Wired MPG Pendant Handwheel CNC Controller For 4/6 Axis Engraving Machine NEWCARVE first appeared on CNC Controller.