Model: CTWGP/ATWGP Size:183*85*32mm
Application： hey could be used in German （SIEMENS）、Japanese（MITSUBISHI)、France（FANUC）、Spain（FAGOR）、France NUM、Taiwan LNC、SYNTEC CNC system.
The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>
Product Overview of 6 Axis CNC Remote Controller
ATWGP:
CTWGP:
The key feature of 6 Axis CNC Remote Controller
Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
2.4G wireless transmission，the transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Estop Function
To improve work efficiency and assure safety.
Axis/Step band switch
To choose X/Y/Z/A/B/C axis or close all axis by axis switch, to choose jog step by step switch.
Reliable and Stable Performance
Low power feature，the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminum MPG is clear, the position is accurate
The ABS MPG is anti-impact and heat-resistant.
General Characteristics of 6 Axis CNC Remote Controller
| Parameter | Description |
| Frequency bands | ISM，433MHZ |
| Supply voltage | 2 AA batteries |
| Wireless transmission distance | 40 meter |
| MPG Encoder | 100PPR |
| Function Key | 5 Keys |
| Output power | 10DB |
| Receiver sensitivity | -98DB |
| Maximum axis | 6 axis |
| Material | ABS、PC、 aluminum |
Attachments of 6 Axis CNC Remote Controller
| CTWGP Wireless MPG | 1 piece |
| Handle | 1 piece |
| Wireless receiver | 1 piece |
| antenna | 1 piece |
| WGP manual | 1 book |
| Package box size | 290*205*63mm |
| Weight | 0.9kg |
The post XHC CNC Wireless Remote Controller Pendant FANUC /MPG Manual Pulse Generator ATWGP CTWGP For 6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>Model: AWGP-3
Model: AWGP-5AA
Application of AWGP-3/5AA 5,6 Axis MPG Controller
AWGP has 2 series:
Basic model: AWGP-3, Only supports 5 axes; axis and rate does not support encoder output
Enhanced model: AWGP-5AA, Support 6 axis; axis and rate support encoding output; support extended 3 key output.
They could be used in German （SIEMENS）、Japanese（MITSUBISHI)、France（FANUC）、Spain（FAGOR）、France NUM、Taiwan LNC、SYNTEC CNC system.
Application circuits of AWGP-3/5AA 5,6 Axis MPG Controller
Product Overview of AWGP-3/5AA 5,6 Axis MPG Controller
Basic model AWGP-3:
Enhanced model AWGP-5AA:
The key feature of AWGP-3/5AA 5,6 Axis MPG Controller
Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB，High receiver sensitivity -98DB.
32 hopping channels，the channel frequency gap is 1Mhz.
The transmission is encrypted， auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
Axis/Step band switch
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch, to choose jog step by step switch.
Enable key
The enable key is used to enable the mpg for safety.
LCD display
The LCD display data with background light. Display the current work state of the CNC system.
General Characteristics of AWGP-3/5AA 5,6 Axis MPG Controller
| Parameter | Description |
| Frequency bands | ISM,433MHZ |
| Supply voltage | 2 AA batteries |
| Wireless transmission distance | 40 meter |
| MPG Encoder | 100PPR |
| Function Key | 3 Keys |
| RF TX power | 10DB |
| Receiver sensitivity | -98DB |
| Maximum axis | 5/6 axis |
| LCD | 128*68 Dot LCD with background |
| Material | ABS、PC、aluminium |
Attachments of AWGP-3/5AA 5,6 Axis MPG Controller
| AWGP Wireless MPG | 1piece |
| Handle | 1 piece |
| Wireless Receiver | 1 piece |
| AWGP Manual | 1 book |
| Package box size | 235*225*85mm |
| Weight | 0.9kg |
The post XHC AWGP-3/5AA CNC Wireless Remote MPG Controller Pendant FANUC /Manual Pulse Generator For 5,6 Axis CNC Router NEWCARVE first appeared on CNC Controller.
]]>The post XHC Mach4 Newest Breakout Board 3 4 6 Axis USB Motion Control Card MKV-M4 2000KHz For CNC Router/ Cutting Machine NEWCARVE first appeared on CNC Controller.
]]>Model Number: MKX-M4
Size：184*127*30mm
Application of MKV-M4 Mach4 motion control card
Application circuits of MKV-M4 Mach4 motion control card
Product Overview of MKV-M4 Mach4 motion control card
The key feature of MKV-M4 Mach4 motion control card
1.Supporting Mach4 Hobby version
2.Support spindle speed feedback
3. Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.
4. Supports Up 6-axis, support differential output Maximum step-pulse frequency is 2000KHz
5. Status indicator LED can be useful to show the USB connection and working status by flashing.
6.16 general-purpose input
7.has speed function, the spindle actual speed Mach4 interface in the real-time display
8.all IO-port isolation, interference, stable performance
General Characteristics of MKV-M4 Mach4 motion control card
| Parameter | Description | |
| Axis drive control | Isolated oc output | Voltage:5V,maximum load:20A |
| type | STEP/DIR | |
| Maximum Step frequency | 2000KHZ | |
| Number of the support axis | MK3-M4：3 axis
MK4-M4：4 axis MK6-M4：6 axis |
|
| Spindle control | Analog output voltage | 0-10V |
| Digital PWM output | 5V,1KHZ,fill factor:%1-100% | |
| STEP/DIR | Min frequncy：15Hz
Max frequncy：4KHz |
|
| 8 digital output | Maximum load of the output line | 50mA |
| The maximum voltage on the outline | 25V | |
| 16 digital input | Maximum load of the input line | 5mA |
| maximum voltage on input line | 25V | |
| PC connection | Standard USB2.0 |
Attachments of MKV-M4 Mach4 motion control card
| MKX-M4 motion card | 1 piece |
| Use wire | 1 piece |
| Driver disk | 1 disk |
| MACH4-USB troubleshooting | 1 book |
| MACH4 config and driver installation | 1 book |
| MKX –M4 user Manual | 1 book |
| Package box size | 275*144*42mm |
| weight | 0.7KG |
The post XHC Mach4 Newest Breakout Board 3 4 6 Axis USB Motion Control Card MKV-M4 2000KHz For CNC Router/ Cutting Machine NEWCARVE first appeared on CNC Controller.
]]>The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.
]]>Features of WHB02 USB Wireless Remote Handle:
Performance or Parameters Description:
WHB02 Wireless Handwheel is a new product for NC Studio System and Card. It is widely used in furniture
production engraving machine, advertising field processing, stone processing. Apply for Weihong NCStudio5.449,
NCStudio8.202 versions and so on.
It has a step value indication, you can easily indicate the step value indicate 1X, 10X for the current sculpture,
or continuous state.
High-speed instruction
Boot power indicator, handle battery under voltage alarm indication; Operation key part: handle with integrated
common machine operator key functions
Feed adjuster
Start / pause function.
X, Y, Z axis adjustment;
X, Y, Z axis fine-tuning;
X, Y, Z axis clear function;
Floating knife function;
The spindle on/off function;
Back to mechanical origin function;
Back workpiece origin function;
Carving open file feature, select File carving and much more.
Working Principle:
The traditional engraving machine, you need work for engraving machine with computer, the worker need to cooperate
between the engraving machine and computer. working inefficiency and operation is not convenient. And WHB02
wireless controller, which is equivalent to a handheld computer to the operator, standing directly in front engraving
the machine, engraving machine can operate normally, and bring great convenience for work.
Function:
1, Supports 3-axis position adjustment
2, Having a processing start, stop, machining feed adjusting spindle open stop functions
3, Look into the barrier transmission distance: 60 meters
4, Support the same room, 64 sets of remote control simultaneously, with no interference
5, With the low-power design, 2 AAA batteries, can be used two months
Application circuits of WHB02 USB Wireless Remote Handle:
Product Overview of WHB02 USB Wireless Remote Handle:
General Characteristics of WHB02 USB Wireless Remote Handle:
| Parameter | Description |
| Frequency bands | ISM，443MHZ |
| Supply voltage | 2 AA batteries |
| Function Key | 31 Keys |
| Wireless transmission distance | 40 meter |
| RF TX power | 10DB |
| Receiver sensitivity | -98DB |
| Maximum axis | 3 axis |
| Material | ABS、PC |
Attachments of WHB02 USB Wireless Remote Handle:
| WHB02 Wireless MPG | 1piece |
| USB receiver | 1piece |
| Driver disk | 1 disk |
| Guarantee card | 1 paper |
| user manual | 1 book |
| Package box size | 265*125*75mm |
| Weight | 0.7kg |
The post Nc Studio USB Wireless Remote Handle Weihong DSP Control Handle For CNC Engraving Cutting Machine XHC WHB02 NEWCARVE first appeared on CNC Controller.
]]>The post XHC CNC 4 6 Axis Wireless Manual Pulse Generator MGP Controller For CNC System Machine USB Port Support Programmable NEWCARVE first appeared on CNC Controller.
]]>Model: PHB04B
Standard: 183*85*32mm
Application of USB Wireless MPG-PHB04B
PHB04B has 2 series：
1、 PHB04B-4：support 4 axis with x,y,z, a
2、 PHB04B-6：support 6 axis with x,y,z,a,b,c
Based on the Windows system, provide the DLL library file for the customer for 2 times development, any numerical control system suitable for all customers.
Application circuits of USB Wireless MPG-PHB04B
Product overview and Key feature of USB Wireless MPG-PHB04B
General Characteristics of USB Wireless MPG-PHB04B
| Parameter | Description |
| Frequency bands | ISM，433MHZ |
| Supply voltage | 2 AA batteries |
| Wireless transmission distance/td> | 40 meter |
| MPG Encoder | 100PPR |
| Function Key | 13 Keys |
| RF TX power | 10DB |
| Receiver sensitivity | -98DB |
| Maximum axis | 6 axis |
| LCD | 128*68 Dot LCD with background |
| Material | ABS、PC、aluminium |
Attachments of USB Wireless MPG-PHB04B
| PHB04B Wireless MPG | 1piece |
| Handle | 1piece |
| USB receiver | 1piece |
| Driver disk | 1 disk |
| Guarantee CARD | 1 paper |
| Package box size | 220*168*60mm |
| Weight | 0.6KG |
The post XHC CNC 4 6 Axis Wireless Manual Pulse Generator MGP Controller For CNC System Machine USB Port Support Programmable NEWCARVE first appeared on CNC Controller.
]]>Model: PHB02B Standard: 183*85*32mm
Application: Based on Windows system, provide the DLL library file for the customer for 2 times development, suitable for customers all kinds of CNC system.
The post XHC Remote Controller PHB02B CNC Machine Wireless Remote Control PHB02B NEWCARVE first appeared on CNC Controller.
]]>
Product overview and Key feature of PHB02B Wireless Remote Controller
General Characteristics of PHB02B Wireless Remote Controller
| Parameter | Description |
| Frequency bands | ISM，433MHZ |
| Supply voltage | 2 AA batteries |
| Wireless transmission distance | 40 meter |
| Function Key | 32 Keys |
| RF TX power | 10DB |
| Receiver sensitivity | -98DB |
| LCD | 128*68 Dot LCD with background |
| Material | ABS、PC、aluminium |
5、Attachments of PHB02B Wireless Remote Controller
| PHB02B Wireless MPG | 1piece |
| USB receiver | 1 piece |
| Driver disk | 1 disk |
| Guarantee CARD | 1 paper |
| Package box size | 220*168*60mm |
| Weight | 0.6kg |
The post XHC Remote Controller PHB02B CNC Machine Wireless Remote Control PHB02B NEWCARVE first appeared on CNC Controller.
]]>