The Syntec 6A Series controllers incorporate embedded system architectures with 8-inch LCD displays and standard keyboard panels. They include integrated servo axes, spindle axes, MPG (manual pulse generator) axes, as well as USB ports on the front panel. This series provides low prices, high stability, easy operation, and high reliability.

·  3-axis servo positioning control

·  2 spindle DA (+/-10V) sets, including 1 encoder set

·  1 set of dedicated MPG (manual pulse generator) axes, including 7 IN points

·  The 6TA and 6MA come standard with 32I/32O, while the 6CA comes standard with 16I/16O

·  Standard keyboard panel

·   Dedicated port on the operation panel for matrix scanning

·  2 sets of USB ports on the front panel, supporting hot plug-and-play

·  Adapter ( 100~240V AC 50/60Hz ) included

·  Operating environment temperature: 55°C

The post CNC CONTROLLER TAIWAN SYNTEC 6MA 3 Axis CNC Milling Machine Controller LCD displays 3-Axis Servo Positioning Control System first appeared on CNC Controller.

1PCS Lihuiyu m2 nano main board

Description of PM53C Nc Studio Controller Main Board:

1. X-Axis Motor (Contain X Axis Limit, Y Axis Limit)

2. x-axis motor (trolley) engine

3. Y-Axis Motor(Beam Motor)

4. the 5v and 24v’s port

LO: Laser Control Signal Output. High Level-No light Dipping, Low Level(=0.3V)-Laser ON

5V: 5V Switch Power Supply

GND: Ground

24V: 24V Switch Power Supply

5. X Axis Limit, Y Axis Limit

6. The Main Board Code

7. If you use Power Supply, Connect LO to TL.

8. External Synchronous Control Signal Output

The post NEWCARVE Lihuiyu M2 Nano Mother Main Board Laser Control System For DIY 3020 3040 K40 6040 Laser Cutter first appeared on CNC Controller.

1PCS Controller Panel

Description of PM53C Nc Studio Controller Panel:

1. X-Axis Motor (Contain X Axis Limit, Y Axis Limit)

2. x-axis motor (trolley) engine

3. Y-Axis Motor(Beam Motor)

4. the 5v and 24v’s port

LO: Laser Control Signal Output. High Level-No light Dipping, Low Level(=0.3V)-Laser ON

5V: 5V Switch Power Supply

GND: Ground

24V: 24V Switch Power Supply

5. X Axis Limit, Y Axis Limit

6. The Main Board Code

7. If you use Power Supply, Connect LO to TL.

8. External Synchronous Control Signal Output

The post NEWCARVE Lihuiyu Control Panel Board For M2 Nano Main Board CO2 Laser Engraving Cutting Machine Cutter K40 3020 first appeared on CNC Controller.

1PCS Dongle

Description of PM53C Nc Studio Controller Dongle:

1. X-Axis Motor (Contain X Axis Limit, Y Axis Limit)

2. x-axis motor (trolley) engine

3. Y-Axis Motor(Beam Motor)

4. the 5v and 24v’s port

LO: Laser Control Signal Output. High Level-No light Dipping, Low Level(=0.3V)-Laser ON

5V: 5V Switch Power Supply

GND: Ground

24V: 24V Switch Power Supply

5. X Axis Limit, Y Axis Limit

6. The Main Board Code

7. If you use Power Supply, Connect LO to TL.

8. External Synchronous Control Signal Output

The post NEWCARVE Lihuiyu Main Board M2 Nano CO2 Laser Control System Dongle A/B/C DIY 3020 3040 K40 first appeared on CNC Controller.

1PCS LIHUIYU M2 Nano main board

1PCS Dongle

1PCS Control Panel

1PCS Cable

Description of PM53C Nc Studio Controller:

1. X-Axis Motor (Contain X Axis Limit, Y Axis Limit)

2. x-axis motor (trolley) engine

3. Y-Axis Motor(Beam Motor)

4. the 5v and 24v’s port

LO: Laser Control Signal Output. High Level-No light Dipping, Low Level(=0.3V)-Laser ON

5V: 5V Switch Power Supply

GND: Ground

24V: 24V Switch Power Supply

5. X Axis Limit, Y Axis Limit

6. The Main Board Code

7. If you use Power Supply, Connect LO to TL.

8. External Synchronous Control Signal Output

The post LIHUIYU Nano M2 CO2 Laser Main Board + Dongle B + Control Panel Board Corellaser CO2 Laser Stamp Machine K40 3020 3040 NEWCARVE first appeared on CNC Controller.

The post WEIHONG NC studio NK260 NK280 software NC studio V10 3 axis integrated CNC system for cnc engraving machine first appeared on CNC Controller.

Specification parameters of PM53C Nc Studio Controller:

CNC Specification

Number of Axes Supported
three axes

Rotary Axes
X/Y as rotary axis(Optional)

Control Signals

Plus Frequency
160KHZ

Control Mode
Position control

Control Signal Type
Differential signals

Position Signal Type
Pulse+Direction

Communication Mode

PCI

Spindle

Analog Voltage Output
0 – 10v

Tool Management

Tool Measurement Mode
Auto measurement, Manual measurement

Tool Calibration Type
Fixed calibration, Mobile calibration, First calibration  Calibration after tool change

Compensation

Compensation Type
Screw error compensation, Backlash compensation, AQE compensation, Tool compensation

Toolpath Program

Supported File Format
*.g; *.nc; *

Operations

WCS Setting
Supporting WCS G54-G59 and Work Zero saving

Processing Technology
Array function,Mirrorrotate,Cycle

Convenitent Operation
Handwheel guide,Breakpoint resurne,Tool selection

High-speed High-precision Optimization

interpolation algorithms
T-type, S-type and LEP algorithms

Software Language

Chinese,English

Reliability  Safety

CNC Software Alarm
Alarms of program error, operation error, over-travel error, PLC error and IO communication error

Features of PM53C Nc Studio Controller:

The post PM53C Nc Studio Controller 3 Axis Original Weihong Control System For CNC Router NEWCARVE first appeared on CNC Controller.

OR

Specification parameters of Weihong NK105 G2 G3 DSP Controller:

CNC Specifications

Number of Axes SuppORted
three axes

Other Controls
Three axes with multiple cylinders

Hardware Specifications

CPU
ARM11

RAM
128m

FLASH
256m

MonitOR
128*64LCD display module

I/Os
Standard

perfORmance indicatOR
The product stands EMI/Electrical fast transient immunity/Surge immunity tests and confORms to the fourth-grade protection standards of GB/T 17626.5-2008.
Resistance to vibration confORms to the GB/T 2423.10-2008 Standards.
The product stands rigid temperature tests and confORms to the industrial standards of GB/T 2423.102-2008.

Spindle

Multiple Gears
8 gears of spindle speed

Tool Management

Tool Magazine Type
Linear tool magazine

Tool Measurement Mode
Auto measurement, Manual measurement

Tool Measurement Type
Fixed calibration, Mobile calibration, First calibration  Calibration after the tool change

Compensation

Backlash compensation

Toolpath Program

SuppORted
* / * / *.g.nc respectively? ?? / * / * / *.demo.iso.eng / * * / / *..cut.plt / *. txt

Operations

WCS Setting
SuppORting WCS G54-G59

Processing Technology
Array function, Cycle machining

Convenient Operations
Handwheel guide, Breakpoint resume, Tool selection

High-speed High-precision Optimization

interpolation algORithms
T-type and S-type algORithms

Software Language

Chinese, English, Polish, Vietnamese

Reliability  Safety

CNC Software Alarm
Alarms of program errOR, operation errOR, over-travel errOR, PLC errOR, and IO communication errOR

Features of Weihong NK105 G2 G3 DSP Controller:

The post Original Weihong NK105 G2 G3 DSP Controller 3 Axis NC Studio Motion Control System For CNC Router ATC Machine NEWCARVE first appeared on CNC Controller.

Packing list: Software and drawing will be sent by email

Application of Mach3 System Wireless Controller BWGP0X-5A:

CNC machine tools, CNC engraving  and milling machine, machine center

Support System

Apply to SIEMENS ,MITSUBISHI,FANUC,NUM,SYNTE CNC …..Numerical

Control System.

FEATURES of Mach3 System Wireless Controller BWGP0X-5A:

1. Wireless ISM frequency band, 433 MHZ

2.10 DB Transmit power, RX sensitivity-98 DB, 50 meters without barrier

3.Anti-interference design, stable and reliable, up to 32 sets

used in 1 room will not affect each other

4.Low-power consumption design,2 AA batteries lasting 30

days in normal operation

5.Axis and speed selecting function

6. Alloy encoder is stable and reliable, feel good, precision calibration.

The working principle of Mach3 System Wireless Controller BWGP0X-5A:

Using wireless transmission technology, convenient operation, eliminating the traditional spring wire connection, reduce the failure rate of cable and remove cable drag viscous oil pollution.

The post Siemens/ Mitsubishi/ Syntec/ Gskcnc Mach3 System Control Wireless Controller For CNC Handwheel BWGP0X-5A NEWCARVE first appeared on CNC Controller.

1 x CNC Mach3 USB 6 Axis Motion Control Card

1 x USB Cable

1 x cd (mach3 version3.043.066 licence, instruction,)

1 x English Manual

Description of XHC MK4 Mach3 USB Motion Control Card:

1. Dual-Processors, ARM+FPGA, More processing power

2. Support all versions of Mach3 (can’t work with Mach4).

3. Work under 32-bit  Windows ( 98, Vista,7, 10) operating system (not including Mac OS)

4. USB jack does not need to install the driver, plug and play under all versions of Windows.

5. Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.

6. Supports 6-axis linkage.

7. Maximum step-pulse frequency is 2000 KHz, can connect servo driver/stepper, driver.

8. The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.

9. 16 inputs.

10. Onboard isolated power supply, not need an external power supply.

11. All IO port fully isolated, strong anti-interference, stable performance.

12. Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.

13. Support XHC series of wireless electronic mach3 MPG, such as WHB04 MPG.

14. With an aluminum shell, effectively shielding interference, stable and reliable performance.

Electrical Characteristics  of XHC MK4 Mach3 USB Motion Control Card:

The post XHC MK4 Mach3 Breakout Board 6 Axis USB Motion Control Card 2MHz Support Windows 7,10 NEWCARVE first appeared on CNC Controller.